Monitor cleaning and maintenance

In previous posts I have discussed how knowing the damage indicator on the monitor, and the opportunity this time, I will discuss how to perform maintenance and cleaning of the monitor so that the possibility of damage could be mitigated and controlled. Here are some steps you can do:

a. Screen and casing should be frequently cleaned from the dust that often occupy and stack that caused the screen looks dirty and unclear. Use a soft cloth. If necessary, use a special fluid to the tube or LCD screen.

b. To prevent premature failure of power supply on the monitor, use power-management features in the display properties sheet or power management to monitor the condition of low-power standby mode after a period (between 10-15 minutes) and metikan after 60 minutes. Use of this feature is much better than using a switch ON / OFF if the computer will be left for a moment.

c. Ensure adequate ventilation the monitor to get on the side, rear, and up, because the monitor uses only passive cooling. Lack of air flow will affect the life of the monitor.

d. Keep monitoring the position of objects that contain magnets, such as speakers.

e. Keep out of reach of children and avoid the monitor not to get wet.